STEP 1k Parquet lacquer ULTRAMAT 6640

Rigostep STEP 1k Parquet lacquer ULTRAMAT 6640,

--TECHNICAL INFORMATION--

--TECHNICAL INFORMATION-2-(How to)

FOR THE PROCESSOR:

• 1-component Polyurethane Parquet lacquer
• STEP Parquet lacquer 1K can be sanded directly on bare Oak wood (or other light wood types).
• If necessary, apply a STEP Primer first for easy, non-marking work
• SYSTEM: 3 layers of STEP Parquet lacquer 1K or 1 layer of STEP Primer lacquer and 2 layers of STEP Parquet lacquer 1K.
• Drying time 2-3 hours between coats of paint.
• Possibly. intermediate sanding with p120 for the last layer.

FOR THE END USER:

• STEP Parquet lacquers have been developed in such a way that the floor does not have a plastic-like appearance.
• Floors finished with STEP are strong and look natural.
• Floors finished with STEP are particularly maintenance-friendly: mopping with STEP Mild Cleaner is sufficient.
• Suitable for underfloor heating.

Instructions,

Shake the paint briefly and vigorously, then pour it through a sieve into a paint tray.
Distribute the paint evenly in lanes or sections.
Roll over overlaps well wet in wet.
Avoid differences in layer thickness. It is important to apply the paint completely. This creates better wetting and better flow. This prevents activation.
Use a microfiber paint roller with a coat thickness of 9-11 mm, and for the edges or small parts, a full, long-haired brush (see related products below).
Only use stainless steel or plastic tools.